SHEET SIZES (wide x large): 60 x 100 mm (2.4”x3.9”) minimum; 450 x 550 mm (13.7”x21.6”) maximum; Optionally, these sizes may be changed according with the customer requirements
FEEDER SYSTEM: Automatic air suction feeder, suction and vacuum pressure combined, at the bottom of the pile. Includes air control.
SPEED: Continuous speed variation up to 80 meters per minute. The production depends on the product/sheet large and the included accessories.
PRINTING SYSTEM (OPTIONAL): The industrial ink jet-printing machine can be applied to a wide range of applications as part of a total solution. It’s possible to print numbers (serialised or not), bar codes, address, personalised messages, at high speed and quality.
PERFORATING AND SCORING SYSTEM (OPTIONAL): The perforation, scoring or slitting wheels are mounted over dismountable perforating arms, which adapt quickly on the working place. The mark or cut is made over rings of special hard steel, designed to obtain different results.Minimum distance between sheet border and the perforating line: 6 mm. Minimum distance between perforating wheels: 12 mm in one shaft; 1 mm with two shafts. Recommended wheel support arms maximum capacity: 6 in one shaft; 8 with two shafts
ELECTRONIC CONTROL SYSTEM: - On, stop, pulse-on, pump on-off and speed variation buttons on control panel.-Optoelectronic detector of feed sheet failures such as fault or doubles sheets or sets. It immediately stops the machine. - Liquid crystal display (LCD) which includes functional messages and 6 digits counter.-Batch running program, with automatic stop of the machine when the number of products achieve the quantity programmed.
SUPPLY VOLTAGE: Automatically from 110 to 240 V. 50 Hz. CA. Power consumption: 2.000 watts (3.000 watts with 40 m3/h pump)
DIMENSIONS/WEIGHT: Belonging to installed accessories.
SAFETY RULES: CE Machinery Directive 89/392/CEE, modified by 91/368/CEE and 93/44/CEE UNE/EN-292-1 y 2; UNE/EN-294; PNE-EN60204-1 
 
AVERAGE PRODUCTION CALCULATION
PM (Average production in units/hour) = [ VE (m/min) x 57 ] / LD (m); VE: speed, in meters per minute; LD: Length of the product, in meters
SPEED CALCULATION:
VE (meters/minute) = [ PM (u/h) x LD (m) ] / 3420; PM: Average production in units/hour
 
The features and technical specifications are subject to change without notice.
All models and systems are patented. Machines made in Spain by AGOR S.L. under licence.
MADE IN CE - SPAIN